AudioCodes Mediant 500L MSBR

User's Manual 67. Configuration Parameters Reference
Version 6.8 825 Mediant 500L MSBR
67.4.8 OCSP Parameters
The Online Certificate Status Protocol (OCSP) parameters are described in the table
below.
Table 67-28: OCSP Parameters
Parameter Description
Web: Enable OCSP Server
EMS: OCSP Enable
CLI: enable
[OCSPEnable]
Enables or disables certificate checking using OCSP.
 [0] Disable (default)
 [1] Enable
For a description of OCSP, see Configuring Certificate Revocation
Checking (OCSP).
Web: Primary Server IP
EMS: OCSP Server IP
CLI: server-ip
[OCSPServerIP]
Defines the IP address of the OCSP server.
The default IP address is 0.0.0.0.
Web: Secondary Server IP
CLI: secondary-server-ip
[OCSPSecondaryServerIP]
Defines the IP address (in dotted-decimal notation) of the secondary
OCSP server (optional).
The default IP address is 0.0.0.0.
Web: Server Port
EMS: OCSP Server Port
CLI: server-port
[OCSPServerPort]
Defines the OCSP server's TCP port number.
The default port number is 2560.
Web: Default Response When
Server Unreachable
EMS: OCSP Default
Response
CLI: default-response
[OCSPDefaultResponse]
Determines whether the device allows or rejects peer certificates
when the OCSP server cannot be contacted.
 [0] Reject (default)
 [1] Allow