User's Manual 11. TR-069 Based Management
Version 6.8 105 Mediant 500L MSBR
♦ InternetGatewayDevice.Services.VoiceService.1.VoiceProfile.1.Line.{i}.Code
c.List.{i}: Configures voice coder used by specific FXS line.
♦ InternetGatewayDevice.Services.VoiceService.1.VoiceProfile.1.Line.{i}.Callin
gFeatures: Configures voice parameters per FXS line such as caller ID.
♦ InternetGatewayDevice.Services.VoiceService.1.VoiceProfile.1.Line.{i}.SIP:
Configures username/password per FXS line. AudioCodes maps this object
to the corresponding entry in the Authentication table
• InternetGatewayDevice.Services.VoiceService.1.VoiceProfile.1.SIP: Configures
SIP parameters specific to the UA such as Proxy server.
• InternetGatewayDevice.Services.VoiceService.1.VoiceProfile.1.RTP: Configures
various RTP parameters for the FXS lines such as RTCP and SRTP.
11.3 Configuring TR-069
The CWMP/TR-069 Settings page is used to enable and configure TR-069.
To configure TR-069:
1. Open the CWMP/TR-069 Settings page (Configuration tab > System menu >
Management > CWMP).
Figure 11-5: CWMP/TR-069 Settings Page
2. Configure the parameters as required. For a description of the TR-069 parameters,
see ''TR-069 Parameters'' on page 788.
3. Click Submit.
4. To save the changes to flash memory, see ''Saving Configuration'' on page 606.
To Next Page
Loading...
