EasyManua.ls Logo

AudioCodes Mediant 500L MSBR

AudioCodes Mediant 500L MSBR
1042 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
User's Manual 718 Document #: LTRT-10466
Mediant 500L MSBR
Field Name Description
SigSourcePort
SIP source port
SigDestPort
SIP destination port
MediaType
Media type - audio, video, or text
SIPTrmReason
SIP call termination reason (BYE, CANCEL, or SIP error codes, e.g., 404)
SipTermDesc
Description of SIP termination reason:
SIP Reason header, if exists, for example: SIP ;cause=200 ;text="Call
completed elsewhere".
If no SIP Reason header exists, the description is taken from the
reason text, if exists, of the SIP response code, for example: "417
Unknown Resource-Priority".
If no reason text exists in the SIP response code, the description is
taken from an internal SIP response mapping mechanism. For
example, if the device receives a SIP response "422", it sends in the
CDR "422 Session Interval Too Small method" as the description.
PstnTermReason
Q.850 protocol termination reason (0-127).
LatchedRtpIp
Remote IP address of the incoming RTP stream that the device "latched"
on to as a result of the RTP latching mechanism for NAT traversal.
LatchedRtpPort
Remote RTP port of the incoming RTP stream that the device "latched"
on to as a result of the RTP latching mechanism for NAT traversal.
LatchedT38Ip Latching of a new T.38 stream - new IP address
LatchedT38Port Latching of a new T.38 stream - new port
55.2.2.4 Release Reasons in CDR for Gateway Application
The possible reasons for call termination for the Gateway / IP-to-IP application which is
represented in the CDR field TrmReason are listed below:
"REASON N/A"
"RELEASE_BECAUSE_NORMAL_CALL_DROP"
"RELEASE_BECAUSE_DESTINATION_UNREACHABLE"
"RELEASE_BECAUSE_DESTINATION_BUSY"
"RELEASE_BECAUSE_NOANSWER"
"RELEASE_BECAUSE_UNKNOWN_REASON"
"RELEASE_BECAUSE_REMOTE_CANCEL_CALL"
"RELEASE_BECAUSE_UNMATCHED_CAPABILITIES"
"RELEASE_BECAUSE_UNMATCHED_CREDENTIALS"
"RELEASE_BECAUSE_UNABLE_TO_HANDLE_REMOTE_REQUEST"
"RELEASE_BECAUSE_NO_CONFERENCE_RESOURCES_LEFT"
"RELEASE_BECAUSE_CONFERENCE_FULL"
"RELEASE_BECAUSE_VOICE_PROMPT_PLAY_ENDED"
"RELEASE_BECAUSE_VOICE_PROMPT_NOT_FOUND"
"RELEASE_BECAUSE_TRUNK_DISCONNECTED"
"RELEASE_BECAUSE_RSRC_PROBLEM"
"RELEASE_BECAUSE_MANUAL_DISC"

Table of Contents

Other manuals for AudioCodes Mediant 500L MSBR

Related product manuals