AudioCodes Mediant 500L MSBR

User's Manual 840 Document #: LTRT-10466
Mediant 500L MSBR
Parameter Description
Generated Registers interval
gen-reg-int
[GeneratedRegistersInterval]
Defines the rate (in seconds) at which the device sends user
register requests (REGISTER messages). The parameter is
based on the maximum number of REGISTER messages that
can be sent at this rate, configured by the
MaxGeneratedRegistersRate parameter.
The valid value is 1 to 5. The default is 1.
Configuration examples:

If you configure the MaxGeneratedRegistersRate parameter
to 100 and the GeneratedRegistersInterval to 5, the device
sends a maximum of 20 REGISTER messages per second
(i.e., 100 messages divided by 5 sec; 100 per 5 seconds).

If you configure the MaxGeneratedRegistersRate parameter
to 100 and the GeneratedRegistersInterval to 1, the device
sends a maximum of a 100 REGISTER messages per
second.
67.6.2 Network Application Parameters
The SIP network application parameters are described in the table below.
Table 67-31: SIP Network Application Parameters
Parameter Description
Signaling Routing Domain Table
Web: SRD Settings
EMS: SRD Table
CLI: configure voip > voip-
network srd
[SRD]
This table parameter configures the Signaling Routing Domains (SRD).
The format of the ini file table parameter is as follows:
[ SRD ]
FORMAT SRD_Index = SRD_Name, SRD_MediaRealm,
SRD_IntraSRDMediaAnchoring, SRD_BlockUnRegUsers,
SRD_MaxNumOfRegUsers, SRD_EnableUnAuthenticatedRegistrations;
[ \SRD ]
For a detailed description of this table, see ''Configuring SRDs'' on page
280.
SIP Interface Table
Web: SIP Interface Table
EMS: SIP Interfaces Table
CLI: configure voip > voip-
network sip-interface
[SIPInterface]
This table parameter configures SIP Interfaces. The SIP Interface
represents a SIP signaling entity, comprising ports (UDP, TCP, and TLS)
and associated with a specific IP interface and an SRD.
The format of the ini file table parameter is as follows:
[ SIPInterface ]
FORMAT SIPInterface_Index = SIPInterface_InterfaceName,
SIPInterface_NetworkInterface, SIPInterface_ApplicationType,
SIPInterface_UDPPort, SIPInterface_TCPPort, SIPInterface_TLSPort,
SIPInterface_SRD, SIPInterface_MessagePolicy,
SIPInterface_TLSMutualAuthentication,
SIPInterface_TCPKeepaliveEnable,
SIPInterface_ClassificationFailureResponseType,
SIPInterface_PreClassificationManSet;
[ \SIPInterface ]
For a detailed description of this table, see ''Configuring SIP Interfaces''
on page 283.