User's Manual 57. Syslog and Debug Recordings
Version 6.8 739 Mediant 500L MSBR
57.3 Configuring Web Operations to Report to Syslog
You can define the operations (activities) in the Web interface that must be reported to the
Syslog server. The following procedure describes how to configure this in the Web
interface. You can also configure this using the ini file parameter, ActivityListToLog or CLI
command, config-system > logging > activity-log.
To define Web activities to report to Syslog server:
1. Open the Syslog Settings page (Configuration tab > System menu > Syslog
Settings).
2. Under the Activity Types to Report via Activity Log Messages group, select the Web
actions to report to the Syslog server. For more information, see ''Syslog, CDR and
Debug Parameters'' on page 807.
Figure 57-2: Web Activities to Report to Syslog
3. Click Submit.
To Next Page
Loading...
