AudioCodes Mediant 500L MSBR

User's Manual 55. Reporting Information to External Party
Version 6.8 711 Mediant 500L MSBR
Table 55-2: CDR Fields for SBC Signaling
CDR Field Name Description Format
SBCReportType
Report Type:
 "CALL_START"
 "CALL_CONNECT"
 "CALL_END"
 "DIALOG_START"
 "DIALOG_END"
String
EPTyp
Endpoint type:
 "SBC"
String
SIPMethod
SIP message type String of up to 10 characters
SIPCallId
Unique ID of call String of up to 50 characters
SessionId
Unique Session ID String of up to 10 characters
Orig
Call originator:
 "LCL" - local
 "RMT" - remote
String
SourceIp
Source IP address String of up to 20 characters
SourcePort
Source UDP port String of up to 10 characters
DestIp
Destination IP address String of up to 20 characters
DestPort
Destination UDP port String of up to 10 characters
TransportType
Transport type:
 "UDP"
 "TCP"
 "TLS"
String
SrcURI
Source URI String of up to 41 characters
SrcURIBeforeMap
Source URI before manipulation String of up to 41 characters
DstURI
Destination URI String of up to 41 characters
DstURIBeforeMap
Destination URI before manipulation String of up to 41 characters
Durat
Call duration (in seconds) String of up to 5 characters
TrmSd
Termination side:
 "LCL" – local
 "RMT" - remote
String
TrmReason
Termination reason String of up to 40 characters
TrmReasonCategory
Termination reason category:
Calls with duration 0 (i.e., not
connected):
 NO_ANSWER:

"GWAPP_NORMAL_CALL_CLEA
R"

"GWAPP_NO_USER_RESPONDI
NG"

"GWAPP_NO_ANSWER_FROM_
USER_ALERTED"
 BUSY:
String of up to 17 characters