AudioCodes Mediant 500L MSBR

User's Manual 50. USB Storage Capabilities
Version 6.8 675 Mediant 500L MSBR
50 USB Storage Capabilities
The device supports USB storage using an external USB hard drive or flash disk (disk on
key) connected to its USB port. The storage capabilities are configured using the CLI and
include the following:

To save network captures to the USB:
# debug capture data physical stop usb

To update the device's firmware from the USB:
# copy firmware from usb:///<cmp file name>

To update the device's configuration from the USB:
# copy voice-configuration from usb:///<ini configuration file
name>

To save the current configuration to the USB:
# copy voice-configuration to usb:///<ini configuration file
name>
Note: Only a single USB storage (formatted to FAT/FAT32) operation is supported at
any given time.