User's Manual 28. Configuring DTMF and Dialing
Version 6.8 429 Mediant 500L MSBR
28 Configuring DTMF and Dialing
The DTMF & Dialing page is used to configure parameters associated with dual-tone multi-
frequency (DTMF) and dialing. For a description of the parameters appearing on this page,
see ''Configuration Parameters Reference'' on page 779.
To configure the DTMF and dialing parameters:
1. Open the DTMF & Dialing page (Configuration tab > VoIP menu > GW and IP to IP
> DTMF & Supplementary > DTMF & Dialing).
2. Configure the parameters as required.
3. Click Submit.
4. To save the changes to flash memory, see ''Saving Configuration'' on page 606.
To Next Page
Loading...
