User's Manual 1040 Document #: LTRT-10466
Mediant 500L MSBR
Function Specification
Analog Loop Start FXS/FXO, Caller ID, polarity reversal, distinctive ringing
Digital PSTN Protocols
ISDN BRI - Euro ISDN, QSIG, VN4/6
Data Routing
PPP, MLPPP, PPPoE, PPPoA, L2TP, IPoE, IPoA
ATM: Up to 8 PVCs
OAM-F5 (send/receive): loopback, continuity check
Shaping: UBR, VBR-NRT, VBR-RT, CBR
DHCP Client, Relay, server
DHCP client toward WAN, supporting the following DHCP
Options: 12 Host Name; 15 Domain Name; 50 Requested IP
Address; 53 DHCP Message Type; 54 DHCP Server Identifier; 55
Parameter Request List; 60 Vendor Class-identifier (e.g. ACS
details); 121 Classless Static Routes.
DHCP server toward LAN, supporting the following DHCP
Options: 1 Subnet Mask; 3 Default Gateway (Router); 6 Domain
Name Server; 12 Host Name; 15 Domain Name; 42 NTP Server;
43 Vendor Specific Information; 51 Lease Time; 66 TFTP server
name; 67 Bootfile name; 120 SIP server (RFC 3361); 121
Classless static routes; 150 TFTP server address.
VLAN
Layer 3 routing and Layer 2 bridging, Jumbo frames
Internal layer 2 switching
Static and dynamic routing (RIP1, RIP2, OSPFv2, BGPv4),
Policy-Based Routing
Multicast routing: IGMPv2/3
IPv6, IPv6/IPv4 Dual Stack, ICMPv6, DHCPv6, SLAAC
Security
Control Protocols
SIP Header conversion
SIP Normalization
Operations & Management
Cloud Resiliency Package (CRP)
IP-to-IP routing translations of various SIP transport types; UDP,
TCP, TLS Translation of RTP, SRTP
SIP trunk with multi-ITSP (Registrations to ITSPs is invoked
independently)
Topology hiding
Call Admission Control (CAC)
Call Black/White list