AudioCodes Mediant 500L MSBR

User's Manual 18. Services
Version 6.8 259 Mediant 500L MSBR
Parameter Description
Action Subject
CLI: action-subject
[CallSetupRules_ActionSubject]
Defines the element (header, parameter, or body) upon
which you want to perform the action.
The valid value is a string of up to 100 characters (case-
insensitive).
Examples:
 header.from contains '1234' (SBC calls only)
 param.call.dst.user (called number)
 param.call.src.user (calling number)
 param.call.src.name (calling name)
 param.call.redirect (redirect number)
 param.call.src.host (source host)
 param.call.dst.host (destination host)
Action Type
CLI: action-type
[CallSetupRules_ActionType]
Defines the type of action to perform.
 [0] Add (default) = Adds new message header,
parameter or body elements.
 [1] Remove = Removes message header, parameter, or
body elements.
 [2] Modify = Sets element to the new value (all element
types).
 [3] Add Prefix = Adds value at the beginning of the string
(string element only).
 [4] Add Suffix = Adds value at the end of the string
(string element only).
 [5] Remove Suffix = Removes value from the end of the
string (string element only).
 [6] Remove Prefix = Removes value from the beginning
of the string (string element only).
 [20] Run Rules Set = Performs a different Rule Set ID,
specified in the 'Action Value' parameter (below).
 [21] Exit = Stops the Rule Set ID and returns a result
("True" or "False").
Action Value
CLI: action-value
[CallSetupRules_ActionValue]
Defines a value that you want to use in the action.
The valid value is a string of up to 300 characters (case-
insensitive).
Examples:
 '+9723976'+ldap.attr.alternateNumber
 '9764000'
 ldap.attr.displayName
 true (if the 'Action Type' is set to Exit)
 false (if the 'Action Type' is set to Exit)