AudioCodes Mediant 500L MSBR

User's Manual 18. Services
Version 6.8 261 Mediant 500L MSBR

Example 3: This example configures the device to route the incoming call according
to whether or not the source number of the incoming call also exists in the AD server.
The device queries the AD server for the attribute record, "telephoneNumber" whose
value is the same as the received source number (e.g., telephoneNumber=4064"). If
such an attribute is found, the device sends the call to the Lync server; if the query
fails, the device sends the call to the PBX.
• Call Setup Rules table configuration:
♦ 'Rules Set ID': 3
♦ 'Attributes to Query': ‘telephoneNumber=’ + param.call.src.user
♦ 'Attributes to Get': telephoneNumber
♦ 'Row Role': Use Current Condition
♦ 'Condition': ldap.found !exists
♦ 'Action Subject': -
♦ 'Action Type': Exit
♦ 'Action Value': false
If the attribute record is found (i.e., condition is not met), the rule ends with a
default exit result of true and uses the first routing rule (Lync). If the attribute
record does not exist (i.e., condition is met), the rule exits with a false result and
uses the second routing rule (PBX).
• Routing table configuration: Two routing rules are assigned with the same
matching characteristics. Only the main routing rule is assigned a Call Setup
Rules Set ID.
♦ Index 1:
 'Call Setup Rules Set Id': 3
 'Destination IP Group ID': 3 (IP Group for Lync)
♦ Index 2:
 'Destination IP Group ID': 4 (IP Group of PBX)