AudioCodes Mediant 500L MSBR

User's Manual 20. Control Network
Version 6.8 299 Mediant 500L MSBR
Table 20-6: Proxy Sets Table Parameter Description
Parameter Description
Web: Proxy Set ID
EMS: Index
CLI: configure voip > voip-
network proxy-set
[ProxySet_Index]
Defines an index number for the new table record.
Proxy Address
CLI: voip-network proxy-ip >
proxy-address
[ProxyIp_IpAddress]
Defines the address of the Proxy server. Up to 10 addresses can
be configured per Proxy Set.
The address can be defined as an IP address in dotted-decimal
notation (e.g., 201.10.8.1) or FQDN. You can also specify the port
using the following format:
 IPv4 address: <IP address>:<port> (e.g., 201.10.8.1:5060)
 IPv6 address: <[IPV6 address]>:<port> (e.g.,
[2000::1:200:200:86:14]:5060)
Transport Type
CLI: voip-network proxy-ip >
transport-type
[ProxyIp_TransportType]
Defines the transport type for communicating with the Proxy server.
 [0] UDP
 [1] TCP
 [2] TLS
 [-1] = Undefined
Note: If this parameter is not configured, the setting of the global
parameter, SIPTransportType is used.
Proxy Name
CLI: proxy-name
[ProxySet_ProxyName]
Defines an arbitrary name to easily identify the Proxy Set.
The valid value is a string of up to 20 characters.
DNS Resolve Method
CLI: dns-resolve-method
[ProxySet_DNSResolveMetho
d]
Defines the DNS query record type for resolving the Proxy server's
host name into an IP address.
 [-1] = DNS resolving is done according to the settings of the
global parameter, Proxy DNS Query Type.
 [0] A-Record = (Default) A-record DNS query.
 [1] SRV = If the Proxy address is configured with a domain
name without a port (e.g., domain.com), an SRV query is done.
The SRV query returns the host names (and their weights). The
device then performs DNS A-record queries per host name
(according to the received weights). If the configured Proxy
address contains a domain name with a port (e.g.,
domain.com:5080), the device performs a regular DNS A-
record
query.
 [2] NAPTR = NAPTR query is done. If successful, an SRV
query is sent according to the information received in the
NAPTR response. If the NAPTR query fails, an SRV query is
done according to the configured transport type. If the
configured Proxy address contains a domain name with a port
(e.g., domain.com:5080), the device performs a regular DNS A-
record query. If the transport type is configured for the Proxy
address, a NAPTR query is not performed.
Note: An SRV query can return up to four host names. For each
host name, the subsequent DNS A-record query can be resolved
into up to 15 IP addresses. However, the device supports up to 30
DNS-resolved IP addresses. If the device receives more than this
number of DNS-resolved IP addresses, the device uses the first 30
IP addresses in the received list, and ignores the rest.