AudioCodes Mediant 500L MSBR

User's Manual 328 Document #: LTRT-10466
Mediant 500L MSBR
3. Configure a Tel Profile according to the parameters described in the table below. For a
description of each parameter, refer to the corresponding "global" parameter.
4. Click Submit, and then save ("burn") your settings to flash memory.
Table 22-4: Tel Profile Table Parameters and Corresponding Global Parameters
Tel Profile Parameter Global Parameter
Common
Web: Index
[TelProfile_Index]
Defines an index number for the new table record.
Web: Profile Name
CLI: profile-name
[TelProfile_ProfileName]
Defines an arbitrary name to easily identify the Tel Profile.
The valid value is a string of up to 20 characters.
Web: Profile Preference
CLI: tel-preference
[TelProfile_TelPreference]
Defines the priority of the Tel Profile, where 1 is the lowest
priority and 20 the highest priority.
Notes:
1. If both the IP Profile and Tel Profile apply to the same
call, the coders and common parameters of the Preferred
profile are applied to the call.
2. If the Preference of the Tel Profile and IP Profile are
identical, the Tel Profile parameters are applied.
3. If the coder lists of both the IP Profile and Tel Profile
apply to the same call, only the coders common to both
are used. The order of the coders is determined by the
preference.
Web: Fax Signaling Method
CLI: fax-sig-method
[TelProfile_IsFaxUsed]
IsFaxUsed
Web: Enable Digit Delivery
CLI: digit-delivery
[TelProfile_EnableDigitDelivery]
EnableDigitDelivery