AudioCodes Mediant 500L MSBR

User's Manual 22. Coders and Profiles
Version 6.8 333 Mediant 500L MSBR
3. Configure an IP Profile according to the parameters described in the table below.
4. Click Submit, and then save ("burn") your settings to flash memory.
Table 22-5: IP Profile Settings Table Parameter Descriptions
Parameter Description
Common
Web: Index
[IpProfile_Index]
Defines an index number for the new table record.
Web: Profile Name
CLI: profile-name
[IpProfile_ProfileName]
Defines an arbitrary name to easily identify the IP Profile.
The valid value is a string of up to 20 characters.
Web: Profile Preference
CLI: ip-preference
[IpProfile_IpPreference]
Defines the priority of the IP Profile, where 20 is the highest
priority and 1 the lowest priority.
Notes:
 If an IP Profile and a Tel Profile apply to the same call,
the coders and other common parameters of the profile
with the highest preference are applied to the call. If the
preference of the profiles is identical, the Tel Profile
parameters are applied.
 If the coder lists of both an IP Profile and a Tel Profile
apply to the same call, only the coders common to both
are used. The order of the coders is determined by the
preference.
 This parameter is applicable only to the Gateway
application.