AudioCodes Mediant 500L MSBR

User's Manual 24. Digital PSTN
Version 6.8 365 Mediant 500L MSBR
Table 24-1: CAS State Machine Parameters Description
Parameter Description
Generate Digit On Time
[CasStateMachineGenerateDigit
OnTime]
Generates digit on-time (in msec).
The value must be a positive value. The default is -1 (use value
from CAS state machine).
Generate Inter Digit Time
[CasStateMachineGenerateInter
DigitTime]
Generates digit off-time (in msec).
The value must be a positive value. The default is -1 (use value
from CAS state machine).
DTMF Max Detection Time
[CasStateMachineDTMFMaxOnD
etectionTime]
Detects digit maximum on time (according to DSP detection
information event) in msec units.
The value must be a positive value. The default is -1 (use value
from CAS state machine).
DTMF Min Detection Time
[CasStateMachineDTMFMinOnD
etectionTime]
Detects digit minimum on time (according to DSP detection
information event) in msec units. The digit time length must be
longer than this value to receive a detection. Any number may
be used, but the value must be less than
CasStateMachineDTMFMaxOnDetectionTime.
The value must be a positive value. The default is -1 (use value
from CAS state machine).
MAX Incoming Address Digits
[CasStateMachineMaxNumOfInc
omingAddressDigits]
Defines the limitation for the maximum address digits that need
to be collected. After reaching this number of digits, the
collection of address digits is stopped.
The value must be an integer. The default is -1 (use value from
CAS state machine).
MAX Incoming ANI Digits
[CasStateMachineMaxNumOfInc
omingANIDigits]
Defines the limitation for the maximum ANI digits that need to
be collected. After reaching this number of digits, the collection
of ANI digits is stopped.
The value must be an integer. The default is -1 (use value from
CAS state machine).
Collet ANI
[CasStateMachineCollectANI]
In some cases, when the state machine handles the ANI
collection (not related to MFCR2), you can control the state
machine to collect ANI or discard ANI.
 [0] No = Don't collect ANI.
 [1] Yes = Collect ANI.
 [-1] Default = Default value - use value from CAS state
machine.
Digit Signaling System
[CasStateMachineDigitSignaling
System]
Defines which Signaling System to use in both directions
(detection\generation).
 [0] DTMF = Uses DTMF signaling.
 [1] MF = Uses MF signaling (default).
 [-1] Default = Default value - use value from CAS state
machine.