AudioCodes Mediant 500L MSBR

User's Manual 46. Software Upgrade
Version 6.8 637 Mediant 500L MSBR
46.1.5.3.3 Configuring SBC User Info Table in Loadable Text File
The SBC User Info table can be configured as a User Info file using a text-based file (*.txt).
This file can be created using any text-based program such as Notepad. This User Info file
is the same file used for the GW User Info table. Thus, this file can include both Gateway
and SBC user information.
You can load the User Info file using any of the following methods:

Web interface - see ''Loading Auxiliary Files'' on page 615

ini file, using the UserInfoFileName parameter - see ''Auxiliary and Configuration File
Name Parameters'' on page
791

Automatic Update mechanism, using the UserInfoFileURL parameter - see Automatic
Update Mechanism
To add SBC users to the SBC User Info file, use the following syntax:
[ SBC ]
FORMAT LocalUser,UserName,Password,IPGroupID
john,john_user,john_pass,2
sue,sue_user,sue_pass,1
where:

[ SBC ] indicates that this part of the file is the SBC User Info table

LocalUser is the user and is used as the Request-URI user part for the AOR in the
database

UserName is the user's authentication username

Password is the user's authentication password

IPGroupID is the IP Group ID to which the user belongs and is used as the Request-
URI source host part for the AOR in the database
Note:
• Make sure that there are no spaces between the values.
• To modify the SBC User Info table using a User Info file, you need to load to the
device a new User Info file containing your modifications.