AudioCodes Mediant 500L MSBR

User's Manual 67. Configuration Parameters Reference
Version 6.8 795 Mediant 500L MSBR
Parameter Description
CLI: voice-configuration
[IniFileURL]
Defines the name of the ini file and the path to the server (IP
address or FQDN) on which it is located. The ini file can be loaded
using HTTP/HTTPS.
For example:
http://192.168.0.1/filename
http://192.8.77.13/config_<MAC>.ini
https://<username>:<password>@<IP address>/<file name>
Notes:
 For this parameter to take effect, a device reset is required.
 When using HTTP or HTTPS, the date and time of the ini file are
validated. Only more recently dated ini files are loaded.
 The case-sensitive string, "<MAC>" can be used in the file name
for instructing the device to replace it with the device's MAC
address. For more information, see ''MAC Address Automatically
Inserted in Configuration File Name'' on page 657. This option
allows the loading of specific configurations for specific devices.
 The maximum length of the URL address is 99 characters.
CLI: cli-script <URL>
[AUPDCliScriptURL]
Defines the URL of the server where the CLI Script file containing
the device's configuration is located. This file is used for automatic
provisioning.
Note: The case-sensitive string, "<MAC>" can be used in the file
name for instructing the device to replace it with the device's MAC
address. For more information, see MAC Address Automatically
Inserted in Configuration File Name on page 657.
CLI: startup-script <URL>
[AUPDStartupScriptURL]
Defines the URL of the server where the CLI Startup Script file
containing the device's configuration is located. This file is used for
automatic provisioning.
Note: The case-sensitive string, "<MAC>" can be used in the file
name for instructing the device to replace it with the device's MAC
address. For more information, see MAC Address Automatically
Inserted in Configuration File Name on page 657.
CLI: prerecorded-tones
[PrtFileURL]
Defines the name of the Prerecorded Tones (PRT) file and the path
to the server (IP address or FQDN) on which it is located.
For example: http://server_name/file, https://server_name/file.
Note: The maximum length of the URL address is 99 characters.
CLI: call-progress-tones
[CptFileURL]
Defines the name of the CPT file and the path to the server (IP
address or FQDN) on which it is located. For example:
http://server_name/file, https://server_name/file.
Note: The maximum length of the URL address is 99 characters.
CLI: cas-table
[CasFileURL]
Defines the name of the CAS file and the path to the server (IP
address or FQDN) on which it is located. For example:
http://server_name/file, https://server_name/file.
Note: The maximum length of the URL address is 99 characters.
CLI: tls-root-cert
[TLSRootFileUrl]
Defines the name of the TLS trusted root certificate file and the URL
from where it can be downloaded.
Note: For this parameter to take effect, a device reset is required.
CLI: tls-cert
[TLSCertFileUrl]
Defines the name of the TLS certificate file and the URL from where
it can be downloaded.
Note: For this parameter to take effect, a device reset is required.