User's Manual 67. Configuration Parameters Reference
Version 6.8 819 Mediant 500L MSBR
Parameter Description
Web: Disable Encryption On
Transmitted RTCP Packets
EMS: RTCP EncryptionDisable
Tx
CLI: RTCP-encryption-disable-
tx
[RTCPEncryptionDisableTx]
Enables encryption on transmitted RTCP packets in a secured
RTP session.
[0] Enable (default)
[1] Disable
CLI: srtp-state-behavior-mode
[ResetSRTPStateUponRekey]
Global parameter that enables synchronization of the SRTP state
between the device and a server when a new SRTP key is
generated upon a SIP session expire. You can also configure this
functionality per specific calls, using IP Profiles
(IpProfile_ResetSRTPStateUponRekey). For a detailed description
of this parameter and for configuring this functionality in the IP
Profile table, see ''Configuring IP Profiles'' on page 332.
Note: If this functionality is configured for a specific IP Profile, the
settings of this global parameter is ignored for calls associated with
the IP Profile.
To Next Page
Loading...
