AudioCodes Mediant 500L MSBR

User's Manual 67. Configuration Parameters Reference
Version 6.8 875 Mediant 500L MSBR
Parameter Description
IpProfile_ResetSRTPStateUponRekey, IpProfile_AmdMode,
IpProfile_SBCReliableHeldToneSource, IpProfile_GenerateSRTPKeys,
IpProfile_SBCPlayHeldTone, IpProfile_SBCRemoteHoldFormat,
IpProfile_SBCRemoteReplacesBehavior,
IpProfile_SBCSDPPtimeAnswer, IpProfile_SBCPreferredPTime,
IpProfile_SBCUseSilenceSupp, IpProfile_SBCRTPRedundancyBehavior,
IpProfile_SBCPlayRBTToTransferee, IpProfile_SBCRTCPMode,
IpProfile_SBCJitterCompensation,
IpProfile_SBCRemoteRenegotiateOnFaxDetection,
IpProfile_JitterBufMaxDelay;
[\IPProfile]
For a description of this table, see ''Configuring IP Profiles'' on page 332.
Tel Profile Table
Web: Tel Profile Settings
EMS: Protocol Definition >
Telephony Profile
CLI: configure voip >
coders-and-profiles tel-
profile
[TelProfile]
This table parameter configures the Tel Profile table. Each Tel Profile ID
includes a set of parameters (which are typically configured separately
using their individual, "global" parameters). You can later assign these
Tel Profile IDs to other elements such as in the Trunk Group table
(TrunkGroup parameter). Therefore, Tel Profiles allow you to apply the
same settings of a group of parameters to multiple channels, or apply
specific settings to different channels.
The format of the ini file table parameter is as follows:
[TelProfile]
FORMAT TelProfile_Index = TelProfile_ProfileName,
TelProfile_TelPreference, TelProfile_CodersGroupID,
TelProfile_IsFaxUsed, TelProfile_JitterBufMinDelay,
TelProfile_JitterBufOptFactor, TelProfile_IPDiffServ,
TelProfile_SigIPDiffServ, TelProfile_DtmfVolume, TelProfile_InputGain,
TelProfile_VoiceVolume, TelProfile_EnableReversePolarity,
TelProfile_EnableCurrentDisconnect, TelProfile_EnableDigitDelivery,
TelProfile_EnableEC, TelProfile_MWIAnalog, TelProfile_MWIDisplay,
TelProfile_FlashHookPeriod, TelProfile_EnableEarlyMedia,
TelProfile_ProgressIndicator2IP, TelProfile_TimeForReorderTone,
TelProfile_EnableDIDWink, TelProfile_IsTwoStageDial,
TelProfile_DisconnectOnBusyTone, TelProfile_EnableVoiceMailDelay,
TelProfile_DialPlanIndex, TelProfile_Enable911PSAP,
TelProfile_SwapTelToIpPhoneNumbers, TelProfile_EnableAGC,
TelProfile_ECNlpMode, TelProfile_DigitalCutThrough,
TelProfile_EnableFXODoubleAnswer, TelProfile_CallPriorityMode;
[\TelProfile]
For a description of this parameter, see Configuring Tel Profiles on page
327.