AudioCodes Mediant 500L MSBR

User's Manual 67. Configuration Parameters Reference
Version 6.8 879 Mediant 500L MSBR
Parameter Description
[SilkTxInbandFEC]

[1] Enable
Silk Max Average Bit Rate
CLI: silk-max-average-bitrate
[SilkMaxAverageBitRate]
Defines the maximum average bit rate for the SILK coder.
The valid value range is 5000 to 30000. The default is 16000.
Note: The SILK coder is Skype's default audio codec used for
Skype-to-Skype calls.
EMS: VBR Coder Header
Format
CLI: VBR-coder-header-format
[VBRCoderHeaderFormat]
Determines the format of the RTP header for VBR coders.
 [0] = (Default) Payload only (no header, TOC, or m-factor) -
similar to RFC 3558 Header Free format.
 [1] = Supports RFC 2658 -
1 byte for interleaving header (always
0), TOC, no m-factor.
 [2] = Payload including TOC only, allow m-factor.
 [3] = RFC 3558 Interleave/Bundled format.
EMS: VBR Coder Hangover
CLI: VBR-coder-hangover
[VBRCoderHangover]
Defines the required number of silence frames at the beginning of
each silence period when using the VBR coder silence
suppression.
The range is 0 to 255. The default is 1.
Web: AMR Payload Format
[AmrOctetAlignedEnable]
Defines the AMR payload format type.
 [0] Bandwidth Efficient
 [1] Octet Aligned (default)
EMS: AMR Coder Header
Format
[AMRCoderHeaderFormat]
Determines the payload format of the AMR header.
 [0] = Non-standard multiple frames packing in a single RTP
frame. Each frame has a CMR and TOC header.
 [1] = AMR frame according to RFC 3267 bundling.
 [2] = AMR frame according to RFC 3267 interleaving.
 [3] = AMR is passed using the AMR IF2 format.
Note: Bandwidth Efficient mode is not supported; the mode is
always Octet-aligned.