User's Manual 892 Document #: LTRT-10466
Mediant 500L MSBR
Parameter Description
The value range is 0 to 20. The default is 0.
Note: For this parameter to take effect, a device reset is
required.
Web/EMS: SSE Payload Type Rx
CLI: V1501-SSE-payload-type-rx
[V1501SSEPayloadTypeRx]
Defines the V.150.1 (modem relay protocol) State Signaling
Event (SSE) payload type Rx.
The value range is 96 to 127. The default is 105.
Web/EMS: SSE Redundancy
Depth
CLI: SSE-redundancy-depth
[V1501SSERedundancyDepth]
Defines the SSE redundancy depth.
The value range is 1-6. The default is 3.
Web: SPRT Transport Ch.0 Max
Payload Size
CLI: SPRT-transport-channel0-
max-payload-size
[V1501SPRTTransportChannel0M
axPayloadSize]
Defines the maximum payload size for V.150.1 SPRT Transport
Channel 0.
The range is 140 to 256. The default is 140.
Web: SPRT Transport Ch.2 Max
Payload Size
CLI: SPRT-transport-channel2-
max-payload-size
[V1501SPRTTransportChannel2M
axPayloadSize]
Defines the maximum payload size for V.150.1 SPRT Transport
Channel 2.
The range is 132 to 256. The default is 132.
Web: SPRT Transport Ch.2 Max
Window Size
CLI: SPRT-transport-channel2-
max-window-size
[V1501SPRTTransportChannel2M
axWindowSize]
Defines the maximum window size of SPRT transport channel
2.
The value range is 8 to 32. The default is 8.
Web: SPRT Transport Ch.3 Max
Payload Size
CLI: SPRT-transport-channel3-
max-payload-size
[V1501SPRTTransportChannel3M
axPayloadSize]
Defines the maximum payload size for V.150.1 SPRT Transport
Channel 3.
The range is 140 to 256. The default is 140.
To Next Page
Loading...
