AudioCodes Mediant 500L MSBR

User's Manual 920 Document #: LTRT-10466
Mediant 500L MSBR
Parameter Description
Web: Call Transfer using re-INVITEs
CLI: enable-call-transfer-using-
reinvites
[EnableCallTransferUsingReinvites]
Enables call transfer using re-INVITEs.
 [0] Disable = (Default) Call transfer is done using REFER
messages.
 [1] Enable = Call transfer is done by sending re-INVITE
messages (instead of REFER).
Notes:
 The device uses two DSP channels per transferred call.
Thus, to use this feature, you also need to configure the
maximum number of available DSP channels, using the
MediaChannels parameter.
 This parameter is applicable only to FXS interfaces.