AudioCodes Mediant 500L MSBR

User's Manual 67. Configuration Parameters Reference
Version 6.8 941 Mediant 500L MSBR
Parameter Description
[CASStateMachineGenerateDig
itOnTime]
The value must be a positive value. The default is -1.
Web: Generate Inter Digit Time
[CASStateMachineGenerateInte
rDigitTime]
Generates digit off-time (in msec).
The value must be a positive value. The default is -1.
Web: DTMF Max Detection Time
[CASStateMachineDTMFMaxOn
DetectionTime]
Detects digit maximum on time (according to DSP detection
information event) in msec units.
The value must be a positive value. The default is -1.
Web: DTMF Min Detection Time
[CASStateMachineDTMFMinOn
DetectionTime]
Detects digit minimum on time (according to DSP detection
information event) in msec units. The digit time length must be
longer than this value to receive a detection. Any number may be
used, but the value must be less than
CasStateMachineDTMFMaxOnDetectionTime.
The value must be a positive value. The default is -1.
Web: MAX Incoming Address
Digits
[CASStateMachineMaxNumOfI
ncomingAddressDigits]
Defines the limitation for the maximum address digits that need to
be collected. After reaching this number of digits, the collection of
address digits is stopped.
The value must be an integer. The default is -1.
Web: MAX Incoming ANI Digits
[CASStateMachineMaxNumOfI
ncomingANIDigits]
Defines the limitation for the maximum ANI digits that need to be
collected. After reaching this number of digits, the collection of
ANI digits is stopped.
The value must be an integer. The default is -1.
Web: Collect ANI
[CASStateMachineCollectANI]
In some cases, when the state machine handles the ANI
collection (not related to MFCR2), you can enable the state
machine to collect ANI or discard ANI.
 [0] No = Don't collect ANI.
 [1] Yes = Collect ANI.

[-1]
Default = Default value.
Web: Digit Signaling System
[CASStateMachineDigitSignalin
gSystem]
Defines which Signaling System to use in both directions
(detection\generation).
 [0] DTMF = DTMF signaling.
 [1] MF = (Default) MF signaling.

[-1]
Default = Default value.