Field Description
You can assign IPv6 Addresses to the selected interface..
Add allows you to create one or more address entries.
A new windows opens that allows you to specify an IPv6 ad-
dress consisting of a Link Prefix and a host identifier.
If your device operates in host mode (IPv6 Mode = @, Ac-
cept Router Advertisement "1 and DHCP Client =
"1), its IPv6 addresses are determined through SLAAC.
You need not configure an IPv6 address manually, but you can
enter addtional addresses if desired.
If your device is operating in router mode (IPv6 Mode = A
* A 3!, Transmit Router
Advertisement = "1 and DHCP Server = "1),
you need to configure its IPv6 addresses here.
Accept Router Advert-
isement
Only for IPv6 = "1 and IPv6 Mode = @
Select if Router Advertisements are to be received on the selec-
ted interface. Router Advertisements are used, e.g., to create
the prefix list.
The function is activated by selecting "1 .
The function is enabled by default.
DHCP Client
Only for IPv6 = 39 and IPv6 Mode = @
Select if your device is to act as DHCP client, i.e., if it is to re-
ceive DHCP options in order to obtain information about the
DNS servers.
The function is activated by selecting "1 .
The function is enabled by default.
Use Add to create more entries.
7 LAN bintec elmeg GmbH
140 bintec RS Series
To Next Page
Loading...
