Field Description
You can configure exceptions for the selected setting in the
Firewall on page 415 menu.
IPv6 Mode Only for IPv6 = "1
Select whether the interface is to be operated in host or in
router mode. Depending on your selection different parameters
are presented for you to configure.
Possible values:
• A * A 3! (default
value): The interface connects different networks to each oth-
er.
• @: The interface is operated in host mode.
Transmit Router Ad-
vertisement
Only for IPv6 = "1 and IPv6 Mode = A
* A 3!
Select whether Router Advertisements are to be sent via the in-
terface.
Using Router Advertisements the list of prefixes is propagated
and the router propagates itself as the standard gateway.
The function is activated by selecting "1 .
The function is enabled by default.
DHCP Server Only for IPv6 = "1 and IPv6 Mode = A
* A 3!
Specify if your device is to act as DHCP server, i.e., if it is to
transmit DHCP options in order to distribute information about
the DNS servers to the clients.
Enable this option if hosts are to create IPv6 addresses through
SLAAC.
The function is activated by selecting "1 .
The function is enabled by default.
IPv6 Addresses Only for IPv6 = "1
bintec elmeg GmbH
7 LAN
bintec RS Series 139
To Next Page
Loading...
