Field Description
Possible values are &, , , and 3 (standard
value)
• For Operation Band = @H /- and @H
-
Only the 3 option is possible here.
Access Client Mode:
In the Access Client Mode no channel you can select. The used
channel is shown.
Selected Channel Displays the channel used.
Used Secondary Chan-
nel
Not for Operation Mode = 3%% / :# 09
'
Displays the second channel used.
Transmit Power Select the maximum value for the radiated antenna power. The
actually radiated antenna power may be lower than the maxim-
um value set, depending on the data rate transmitted. The max-
imum value for Transmit Power is country-dependent.
Possible values:
• '? (default value): The maximum antenna power is used.
• :
• :
• :
• :
• :
• , :
Fields in the menu Performance Settings
Field Description
Wireless Mode Select the wireless technology that the access point is to use.
Only for Operation Mode = 3%% / :# 09
' and Operation Band = @H /- or for
8 Wireless LAN bintec elmeg GmbH
156 bintec RS Series
To Next Page
Loading...
