Field Description
Access Control Select whether only certain clients are to be permitted for this
wireless network.
The function is activated by selecting "1.
The function is disabled by default.
Allowed Addresses Use Add to make entries and enter the MAC addresses (MAC
Address) of the clients to be permitted.
Fields in the menu Bandwidth limitation for each WLAN client
Field Description
Rx Shaping Select a bandwidth limitation in the receive direction.
Possible values are
• ) 1 (default value)
• F '"/, F '"/, '"/ up to '"/
in single Mbit/s steps, '"/, '"/, & '"/,
'"/ and '"/.
Tx Shaping Select a bandwidth limitation in the transmit direction.
Possible values are
• ) 1 (default value)
• F '"/, F '"/, '"/ up to '"/
in single Mbit/s steps, '"/, '"/, & '"/,
'"/ and '"/.
Fields in the menu Advanced Settings
Field Description
Beacon Period Enter the time in milliseconds between the sending of two
beacons.
This value is transmitted in Beacon and Probe Response
Frames.
Possible values are to &.
The default value is ms.
DTIM Period Enter the interval for the Delivery Traffic Indication Message
bintec elmeg GmbH
8 Wireless LAN
bintec RS Series 171
To Next Page
Loading...
