Field Description
• A#: Enables the entry of a range of port numbers.
• 1#: Entry of privileged port numbers: 0 ... 1023.
• : Entry of server port numbers: 5000 ... 32767.
• 61 : Entry of client port numbers: 1024 ... 4999.
• 61 : Entry of client port numbers: 32768 ... 65535.
• ) +1#: Entry of unprivileged port numbers: 1024
... 65535.
Enter the appropriate values for the individual port or start port
of a range in Port and, for a range, the end port in to Port.
Destination Port Only for Layer 4 Protocol = *6 or .5
Enter the destination port.
First select the port number range.
Possible values:
• 3( (default value): The route is valid for all port numbers.
• #1: Enables the entry of a port number.
• A#: Enables the entry of a range of port numbers.
• 1#: Entry of privileged port numbers: 0 ... 1023.
• : Entry of server port numbers: 5000 ... 32767.
• 61 : Entry of client port numbers: 1024 ... 4999.
• 61 : Entry of client port numbers: 32768 ... 65535.
• ) +1#: Entry of unprivileged port numbers: 1024
... 65535.
Enter the appropriate values for the individual port or start port
of a range in Port and, for a range, the end port in to Port.
DSCP / TOS Value Select the Type of Service (TOS).
Possible values:
• # (default value): The type of service is ignored.
• 56 :( E1: Differentiated Services Code Point
according to RFC 3260 is used to signal the priority of IP
packets (indicated in binary format).
• 56 5%1 E1: Differentiated Services Code Point
bintec elmeg GmbH
10 Networking
bintec RS Series 229
To Next Page
Loading...
