Field Description
• %#
• %1=
• (
• %+
• %
The default value is . $.
Protocol Select a protocol, if required. The 3( option (default value)
matches any protocol.
Destination IP Ad-
dress/Netmask
Enter, if required, the destination IP address and netmask of the
data packets.
Possible values:
• 3( (default value)
• @: Enter the IP address of the host.
• )79: Enter the network address and the related net-
mask.
Destination Port/Range Enter, if required, a destination port number or a range of des-
tination port numbers.
Possible values:
• 311 (default value): The destination port is not specified.
• +%$( +: Enter a destination port.
• +%$( + #: Enter a destination port range.
Source Interface If required, select your device's source interface.
Source IP Address/
Netmask
Enter, if required, the source IP address and netmask of the
data packets.
Possible values:
• 3( (default value)
• @: Enter the IP address of the host.
• )79: Enter the network address and the related net-
mask.
bintec elmeg GmbH
10 Networking
bintec RS Series 255
To Next Page
Loading...
