BinTec RS353a - Page 278

Field Description
fix length.
Destination Port/Range Only for Protocol = *6, .5 or *6/.5
Enter a destination port number or a range of destination port
numbers.
Possible values:
• 311 (default value): The destination port is not specified.
• +%$( +: Enter a destination port.
• +%$( + #: Enter a destination port range.
Source IPv4 Address/
Netmask
Enter the source IPv4 address of the data packets and the cor-
responding netmask.
Possible values:
• 3( (default value): The source IP address/netmask are not
specified.
• @: Enter the source IP address of the host.
• )79: Enter the source network address and the corres-
ponding netmask.
Source IPv6 Address/
Length
Enter the source IPv6 address of the data packets and the pre-
fix length.
Possible values:
• 3( (default value): The source IP address/length are not
specified.
• @: Enter the source IP address of the host.
• )79: Enter the source network address and the prefix
length.
Source Port/Range Only for Protocol = *6, .5 or *6/.5
Enter a source port number or a range of source port numbers.
Possible values:
• 311 (default value): The source port is not specified.
• +%$( +: Enter a source port.
• +%$( + #: Enter a source port range.
10 Networking bintec elmeg GmbH
262 bintec RS Series