Field Description
DHCP Client on Inter-
face
Only for Network Configuration = 5@6
Here you can select an Ethernet interface on your router which
is to act as the DHCP client.
You need this setting, for example, if your provider's router is
being used as the DHCP server.
You can choose from the interfaces available to your device;
however the interface must be a member of the drop-in group.
ARP Lifetime Determines the time period for which the ARP entries will be
held in the cache.
The default value is & seconds.
DNS assignment via
DHCP
The gateway can modify DHCP packets which pass through the
drop-in group and identify itself as an available DNS server.
Possible values:
• .%# (default value)
• -7 3
Interface Selection Select all the ports which are to be included in the Drop In
group (in the network).
Add new entries with Add.
bintec elmeg GmbH
10 Networking
bintec RS Series 285
To Next Page
Loading...
