Field Description
Status
Only for Event Type # *
Select whether Destination IP Address A%"1 must be
(default value) or .%"1 in order to initiate the opera-
tion.
Interval
Only for Event Type # *
Enter the time in Seconds after which a ping must be resent.
The default value is seconds.
Successful Trials Only for Event Type # *
Specify how many pings need to be answered for the host to be
regarded as accessible.
You can use this setting to specify, for example, when a host is
deemed to be accessible once more, and used again, instead of
a backup device.
Possible values are to &.
The default value is &.
Unsuccessful Trials Only for Event Type # *
Specify how many pings need to be unanswered for the host to
be regarded as inaccessible.
You can use this setting to specify, for example, when a host is
deemed to be inaccessible, and that a backup device should be
used.
Possible values are to &.
The default value is &.
Monitored Certificate
Only for Event Type 6$% 0$
Select the certificate whose validity should be checked.
Remaining Validity
Only for Event Type 6$% 0$
Enter the desired value for the remaining validity of the certific-
ate in percentage.
bintec elmeg GmbH
17 Local Services
bintec RS Series 489
To Next Page
Loading...
