Field Description
the intended operation.
Possible values:
• .+ (default value): The function is enabled.
• 57: The interface is disabled.
Traffic Direction
Only for Event Type $% *$$%
Select the direction of the data traffic whose values should be
monitored as initiating an operation.
Possible values:
• AD (default value): Incoming data traffic is monitored.
• *D: Outgoing data traffic is monitored.
Interface Traffic Condi-
tion
Only for Event Type $% *$$%
Select whether the value for data traffic must be
(default value) or 0 the value specified in *$
*$$% in order to initiate the operation.
Transferred Traffic
Only for Event Type $% *$$%
Enter the desired value in kBytes for the data traffic to serve as
comparison.
The default value is .
Destination IP Address
Only for Event Type # *
Enter the IP address whose accessibility is to be checked.
Source IP Address
Only for Event Type # *
Enter an IP address to be used as sender address for the ping
test.
Possible values:
• 3% (default value): The IP address of the interface
over which the ping is sent is automatically entered as sender
address.
• +%$%: Enter the desired IP address in the input field.
17 Local Services bintec elmeg GmbH
488 bintec RS Series
To Next Page
Loading...
