Field Description
Monitored IP Address Enter the IP address of the host to be monitored.
Possible values:
• 5$1 7( (default value): The default gateway is
monitored.
• +%$%: Enter the IP address of the host to be monitored
manually in the adjacent input field.
Source IP Address Select how the IP address is to be determined that your device
uses as the source address of the packet sent to the host to be
monitored.
Possible values:
• 3% (default value): The IP address is determined
automatically.
• +%$%; Enter the IP address in the adjacent input field.
Interval Enter the time interval (in seconds) to be used for checking the
availability of hosts.
Possible values are to &.
The default value is .
Within a group, the smallest Interval of the group members is
used.
Successful Trials Specify how many pings need to be answered for the host to be
regarded as accessible.
You can use this setting to specify, for example, when a host is
deemed to be accessible once more, and used again, instead of
a backup device.
Possible values are to &.
The default value is &.
Unsuccessful Trials Specify how many pings need to be unanswered for the host to
be regarded as inaccessible.
You can use this setting to specify, for example, when a host is
deemed to be inaccessible, and that a backup device should be
17 Local Services bintec elmeg GmbH
508 bintec RS Series
To Next Page
Loading...
