Field Value
• 6%1: Messages with emergency, alert and critical prior-
ity are recorded.
• : Messages with emergency, alert, critical and error pri-
ority are recorded.
• 2#: Messages with emergency, alert, critical, error and
warning priority are recorded.
• )%: Messages with emergency, alert, critical, error,
warning and notice priority are recorded.
• $ (default value): Messages with emergency,
alert, critical, error, warning, notice and information priority are
recorded.
• 5"#: All messages are recorded.
Maximum Number of
Accounting Log
Entries
Enter the maximum number of login process entries that are
stored internally in the device.
Possible values are to .
The default value is
Cloud NetManager
communication
Only for devices with support for being managed by the Cloud
NetManager.
Enable or disable the option Cloud NetManager communica-
tion
The function is enabled by default.
Cloud NetManager ad-
dress
Only for devices with support for being managed by the Cloud
NetManager.
The address of the bintec elmeg Cloud NetManager is precon-
figured. If you want to run your own management system, you
need to enter the address of your server here.
Manual WLAN Control-
ler IP Address
This function is only available on devices with a wireless LAN
controller.
Enter the IP address of the WLAN controller.
The value can only be modified it the WLAN controller function
is enabled.
5 System Management bintec elmeg GmbH
58 bintec RS Series
To Next Page
Loading...
