Canon LBP352 - Page 209

➠ The settings are enabled after the hard reset is performed.
Using the operation panel
● You can also enable or disable LPD print, RAW print, and IPP print from the setting menu of the operation
panel.
LPD Settings(P. 380)
RAW Settings(P. 380)
IPP Print(P. 381)
● WSD settings can also be accessed from the setting menu of the operation panel. WSD(P. 381)
Setup procedures on your computer
After the setting in the machine is completed, you may need to congure settings or install applications on your
computer as well. Congure settings in your computer as necessary.
● Conguring printer ports
Printing errors can occur when the IP address of the machine has been changed, or when a printer has been
added via the Windows printer folder. These errors are typically caused by incorrect printer port settings. For
example, an incorrect port number or port type may have been specied in the computer. To x this type of
problem, congure the printer port settings by following the procedure for changing the standard TCP/IP
port described in the "Printer Driver Installation Guide".
● Setting up WSD network devices on Windows Vista/7/8
Install the printer driver by following the procedure for installation with the WSD port described in the
"Printer Driver Installation Guide".
● Enabling IPP/IPPS
Install the printer drivers by specifying the IPP port.
Enabling IPP/IPPS(P. 203)
LINKS
Setting Up Print Server(P. 212)
Network
202