SECTION 55 - ELECTRICAL SYSTEM - CHAPTER 1
55-6
If you have one of these tractors, the brake light
circuit can be disabled by disconnecting the bullet
connector, 1, located in the wire harness where it
attaches to the lighting control box, 2.
IMPORTANT: When you later reattach the machine
to a standard electrical socket on propelling vehicle,
the brake light circuit must be reconnected to
function properly.
IMPORTANT: Ifthismachineistobetransportedon
the highway, the propelling vehicle must be equipped
with the appropriate electrical socket so that the
brake lights function.
50011809
1
2
8
To Next Page
Loading...
