Configuring Security, Quality, and Network Features
Configuring Domain and Internet Settings
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 140
5
STEP 5 Click Submit All Changes.
Configuring Domain and Internet Settings
Configuring Restricted Access Domains
You can configure restricted access domains. If you enter domains, the Cisco IP
phones respond to SIP messages only from the entered servers.
STEP 1 Log in to the configuration utility.
STEP 2 Click Admin Login and advanced.
STEP 3 Click the System tab.
STEP 4 Enter fully-qualified domain names (FQDNs) for each SIP server you want the
phone to respond to. Separate with semicolons.
STEP 5 Click Submit All Changes.
Configuring DHCP, Static IP, and PPPoE Information
STEP 1 Log in to the configuration utility.
STEP 2 Click Admin Login and advanced.
Use Remote Pref
Codec
If set to yes, the phone communicates using the remote
phone’s preferred codec. If set to no, the Cisco IP phone
communicates using its own preferred codec (as indicated in
the Preferred Codec field and in the SDP by order of
preferences). The default vale is no.
Codec Negotiation
When set to Default, the Cisco IP phone responds to an Invite
with a 200 OK response advertising the preferred codec only.
When set to List All, the Cisco IP phone responds listing all the
codecs that the phone supports. The default value is Default,
or to respond with the preferred codec only.
Parameter Description
To Next Page
Loading...
Need help?
General
