Cisco SPA IP Phone Field Reference
Ext Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 295
B
In a configuration profile, the Line parameters must be appended with the
appropriate numeral to indicate the line to which the setting applies. For example:
[1] to specify line one
[2] to specify line two
General
Line Enable: To enable this line for service, select yes. Otherwise, select no.
Defaults to yes.
Share Line Appearance
Parameter Description
Share Ext Indicates whether this extension is to be shared with
other stations or private. If the extension is not shared,
then a call appearance assigned to this extension is not
shared, regardless the setting of <Share Call
Appearance> for that call appearance. If the extension
is shared, then whether or not a call appearance
assigned to this extension is shared follows the setting
of <Share Call Appearance> for that call appearance.
The choices are shared or private.
Defaults to shared.
Shared User ID The user identified assigned to the shared line
appearance.
Subscription Expires Number of seconds before the SIP subscription
expires. Before the subscription expiration, the phone
gets NOTIFY messages from the SIP server on the
status of the shared phone extension. Defaults to 60
seconds.
Restrict MWI When enabled, the message waiting indicator lights
only for messages on private lines.
Monitor User ID (Cisco
SPA300 Series, Cisco
SPA500 Series)
This field is for future use.
To Next Page
Loading...
Need help?
General
