Configuring Regional Parameters and Supplementary Services
Call Progress Tones
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 179
7
Call Progress Tones
For definitions of all call progress tones, see “Call Progress Tones” section on
page 255.
Distinctive Ring Patterns
Ring cadence defines the ringing pattern that announces a telephone call.
NOTE The WIP310 has only eight distinctive ring pattern fields.
The pattern is:
length(on/off)
where:
• Length: The total length of the ring
• On: The number of “on” seconds
• Off: The number of “off” seconds.
Example 1: Normal Ring
60(2/4)
• Number of Cadence Sections = 1
• Cadence Section 1: Section Length = 60 s
• Number of Segments = 1
• Segment 1: On=2s, Off=4s
• Total Ring Length = 60s
Example 2: Distinctive Ring (short,short,short,long)
60(.2/.2,.2/.2,.2/.2,1/4)
• Number of Cadence Sections = 1
• Cadence Section 1: Section Length = 60s
• Number of Segments = 4
• Segment 1: On=0.2s, Off=0.2s
To Next Page
Loading...
Need help?
General
