Cisco SPA303 Administration Guide

Cisco SPA IP Phone Field Reference
Phone Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 292
B
Programmable Softkeys
The Cisco SPA300 Series and Cisco SPA500 Series IP phones (models with
display screens) have four softkeys on the screen that, when pressed, perform
certain actions.
You can customize the softkeys displayed on the phone, and create your own
softkeys for speed dials or XML scripts. Customized softkey information is entered
in the PSK1 through PSK6 fields.
Parameter Description
Extension Mobility Enable or disable extension mobility.
Defaults to no (disabled).
EM User Domain The user domain for extension mobility.
Defaults to blank.
Parameter Description
Programmable Softkey Enable Enables programmable softkeys (SPA525G/525G2
only).
Idle Key List Softkeys that display when the phone is idle. See
Customizing Phone Softkeys, page 62 for more
information.
Missed Call Key List Softkeys that display when a call has been missed.
See Customizing Phone Softkeys, page 62 for
more information.
Off Hook Key List Softkeys that display when the receiver is lifted, or
the headphone or speakerphone buttons are
pressed. See Customizing Phone Softkeys,
page 62 for more information.
Dialing Input Key List Softkeys that display when the user must enter
dialing data. See Customizing Phone Softkeys,
page 62 for more information.

Cisco SPA303 Specifications

General

Display	Monochrome LCD
Lines	3
Speakerphone	Yes
Headset Jack	Yes (2.5 mm)
Handset	Yes
Ethernet Ports	2 x 10/100 Mbps
Protocol	SIP
Power	Power over Ethernet (PoE) or AC adapter
Audio Codec Support	G.711, G.729
QoS	802.1p/q