Cisco SPA IP Phone Field Reference
User Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 314
B
Screen (Cisco SPA525G/525G2)
Headset Volume Sets the default volume for the headset.
Bluetooth Volume Volume of the Bluetooth device.
NOTE Applies to the Cisco SPA525G/525G2 only.
Parameter Description
Screen Saver Enable Enables a screen saver on the phone’s LCD. When the phone
is idle for a specified time, it enters screen saver mode.
(Users can set up screen savers directly using phone Setup
button.) Any button press or on/off hook event triggers the
phone to return to its normal mode. (The screen shows
“Press any key to unlock your phone.”) If a user password is
set, the user must enter it to exit screen saver mode.
Screen Saver Type Choose the type of screen saver:
• Black Background—Displays a black screen.
• Gray Background—Displays a gray screen.
• Black/Gray Rotation—The screen incrementally cycles
from black to gray.
• Picture Rotation—The screen rotates through available
pictures on the phone.
• Digital Frame—Shows the background picture.
Screen Saver Trigger
Time
Number of seconds that the phone remains idle before the
screen saver turns on.
Screen Saver Refresh
Time
Number of seconds before the screen saver should refresh
(if, for example, you chose a rotation of pictures).
To Next Page
Loading...
Need help?
General
