Cisco SPA IP Phone Field Reference
Attendant Console Tab (Cisco SPA500 Series)
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 316
B
Attendant Console Tab (Cisco SPA500 Series)
This tab includes the following sections:
• General, page 316
• Unit 2, page 317
General
Parameter Description
Subscribe Expires Specifies how long the subscription remains valid.
After the specified period of time, elapses, the Cisco
SPA500S initiates a new subscription.
Defaults to 1800.
Subscribe Retry Interval Specifies the length of time to wait to try again if
subscription fails.
Unit 1 Enable Enables or disables the first Cisco SPA500S unit (each
IP phone can have up to two Cisco SPA500Ss
attached).
Subscribe Delay Length of delay before attempting to subscribe.
Defaults to 1.
Unit 2 Enable Enables or disables the second Cisco SPA500S unit
(each IP phone can have up to two Cisco SPA500Ss
attached).
Server Type Selects the type of server used (Cisco SPA 9000,
BroadSoft, or Asterisk).
Test Mode Enable Enables or disables test mode. When test mode is
enabled, the LEDs are turned on when keys are
pressed, going from off to green to red, and back to off.
In test mode, when all the buttons on the Cisco
SPA500S are returned to off, all the keys become
orange. The IP phone must be rebooted after the test is
completed.
Attendant Console Call
Pickup Code
The star code used for picking up a ringing call.
Defaults to *98.
To Next Page
Loading...
Need help?
General
