Cisco SPA303 - Regional Tab; Call Progress Tones

Cisco SPA IP Phone Field Reference
Regional Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 255
B
Regional Tab
This section describes the fields for the following headings on the Regional tab:
• Call Progress Tones, page 255
• Distinctive Ring Patterns, page 258
• Control Timer Values (sec), page 259
• Vertical Service Activation Codes, page 260
• Vertical Service Announcement Codes, page 265
• Outbound Call Codec Selection Codes, page 265
• Time (Cisco SPA525G/525G2 Only), page 268
• Language (Cisco SPA525G/525G2 Only), page 268
• Miscellaneous, page 268
Call Progress Tones
Parameter Description
Dial Tone Prompts the user to enter a phone number.
Defaults to 350@-19,440@-19;10(*/0/1+2).
Bluetooth Dial Tone (Cisco
SPA525G/525G2 only)
Tone that indicates a bluetooth headset is on and the
user can make a call.
Defaults to 350@-19,440@-19;1(0/*/0);10(*/0/1+2).
Outside Dial Tone Alternative to the Dial Tone. It prompts the user to enter
an external phone number, as opposed to an internal
extension. It is triggered by a, (comma) character
encountered in the dial plan.
Defaults to 420@-16;10(*/0/1).
Prompt Tone Prompts the user to enter a call forwarding phone
number.
Defaults to 520@-19,620@-19;10(*/0/1+2).