Customizing Cisco SPA and Wireless IP Phones
Configuring Phone Information and Display Settings
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 47
3
STEP 5 (Optional) Enter the Voice Mail Subscribe Interval, or the expiration time, in
seconds, of a subscription to a voice mail server.
STEP 6 Click Submit All Changes. The phone reboots.
Configuring Internal Voice Mail for Each Extension (When Using Cisco
SPA 400 for Voice Mail)
STEP 1 Log in to the configuration utility.
STEP 2 Click Admin Login and advanced.
STEP 3 Click the Ext <number> tab.
STEP 4 Under Call Feature Settings, enter the voice mail line number and phone extension
in the Mailbox ID field. For example, 2101 indicates that the Cisco SPA 400 voice
mail server is configured on the Cisco SPA 9000 Line 2, phone extension 101.
STEP 5 Enter the IP address of the voice mail server.
STEP 6 Click Submit All Changes.
Customizing the Startup Screen
You can create a text or 128 x 48 pixel by 1-bit deep image logo to display when
the IP phone boots up. (Not applicable to the WIP310.)
NOTE A logo only displays for a short period after the Cisco logo during the boot
sequence.
Cisco SPA303 and Cisco SPA50XG:
STEP 1 Log in to the configuration utility.
STEP 2 Click Admin Login and advanced.
To Next Page
Loading...
Need help?
General
