Cisco SPA IP Phone Field Reference
Cisco SPA525G/525G2-Specific Tabs
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 318
B
Each tab provides the read-only fields described in the following table:
Cisco SPA525G/525G2-Specific Tabs
The following tabs appear on the Cisco SPA525G/525G2.
Wi-Fi
Enable or disable the Wireless-G service on the phone from this tab.
Parameter Description
Unit Enable Displays if the Unit is enabled or disabled.
Subscribe Expires Displays when the current subscription expires. After
the subscription expires, the Cisco SPA500S
automatically requests a new subscription.
HW Version Displays the version of the hardware.
Unit Online Displays whether the unit is powered on and
connected or not.
Subscribe Retry Interval Displays the length of time the Cisco SPA500S waits to
try again if subscription fails.
SW Version Displays the version of the software currently running
on the unit.
Key Name Displays the name assigned to each key (1-32) on the
Cisco SPA500S unit.
Type Displays the function enabled for each key (1-32) on the
Cisco SPA500S unit.
Line Displays the extension assigned to each key (1-32) on
the Cisco SPA500S unit.
Station Displays the subscribe URI configured for each key (1-
32) on the Cisco SPA500S unit.
To Next Page
Loading...
Need help?
General
