Customizing Cisco SPA and Wireless IP Phones
Configuring BroadSoft Settings (Cisco SPA300 Series and Cisco SPA500 Series)
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 89
3
The following graphic is an example of an LDAP configuration:
For more information on LDAP, including troubleshooting information, see the
Configuring LDAP Directory Search on SPA SIP IP Phones
Application Note,
available from http://www.cisco.com/web/partners/sell/smb/products/
voice_and_conferencing.html#~vc_technical_resources
(partner log on required).
Configuring BroadSoft Settings (Cisco SPA300 Series and
Cisco SPA500 Series)
Configuring BroadSoft Directory
The BroadSoft directory service enables users to search and view their personal,
group, or enterprise contacts. This application feature uses BroadSoft's Extended
Services Interface (XSI).
LDAP Number Mapping Can be blank if not needed.
NOTE With the LDAP number mapping you can
manipulate the number that was retrieved from the
LDAP server. For example, you can append 9 to the
number if your dial plan requires a user to enter 9
before dialing. Add the 9 prefix by adding (<:9xx.>) to
the LDAP Number Mapping field. For example, 555
1212 would become 9555 1212.
If you do not manipulate the number in this fashion, a
user can use the Edit Dial feature to edit the number
before dialing out.
Parameter Description
To Next Page
Loading...
Need help?
General
