Cisco SPA303 Administration Guide

Cisco SPA IP Phone Field Reference
System Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 233
B
System Tab
This section describes the fields for the following headings on the System tab:
• System Configuration, page 233
• Internet Connection Type and Static IP Settings, page 235
• PPPoE Settings (Cisco SPA525G/525G2 Only), page 236
• Optional Network Configuration, page 236
• VLAN Settings, page 237
• Wi-Fi Settings (Cisco SPA525G/525G2 Only), page 239
• Bluetooth Settings (Cisco SPA525G/525G2 Only), page 239
• VPN Settings (Cisco SPA525G/525G2 Only), page 239
System Configuration
Parameter Description
Restricted Access Domains
(SIP)
This feature is used when implementing software
customization.
Enable Web Server Enable/disable web server of the IP phone.
Defaults to yes.
Web Server Port Port number of the configuration utility.
Defaults to 80.
SPA525-http-write (Cisco
SPA525G/525G2 SPCP only)
Allow Cisco Configuration Assistant (CCA) or other
application to write XML file parameters directly to the
phone using HTTP.
Choose yes to allow this feature, or no to disable this
feature.
Enable Web Admin Access Lets you enable or disable local access to the
configuration utility. Select yes or no from the drop-
down menu.
Defaults to yes.

Cisco SPA303 Specifications

General

Display	Monochrome LCD
Lines	3
Speakerphone	Yes
Headset Jack	Yes (2.5 mm)
Handset	Yes
Ethernet Ports	2 x 10/100 Mbps
Protocol	SIP
Power	Power over Ethernet (PoE) or AC adapter
Audio Codec Support	G.711, G.729
QoS	802.1p/q