Cisco SPA IP Phone Field Reference
User Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 312
B
• Audio Volume, page 313
• Screen (Cisco SPA525G/525G2), page 314
Call Forward
See Vertical Service Activation Codes, page 260 for more information on call
forwarding parameters.
Speed Dial
Speed Dial 2 through 9: Target phone number (or URL) assigned to speed dial 2, 3,
4, 5, 6, 7, 8, or 9.
Defaults to blank.
NOTE Speed dial configuration has its own tab on the Cisco SPA525G and does not
appear in this section on the WIP310. Speed dial configuration from the WIP310 is
done on the phone. You can also configure speed dials on the Cisco SPA300 Series
and Cisco SPA500 Series IP phones; see the User Guide for the phone for more
information.
Parameter Description
Cfwd All Dest Enter the extensions to forward calls to.
Cfwd Busy Dest Enter the extensions to forward calls to when the line is
busy.
Defaults to voice mail.
Cfwd No Ans Dest Enter the extension to forward calls to when the call is
not answered.
Defaults to voice mail.
Cfwd No Ans Delay Enter the time delay in seconds to wait before
forwarding a call that is not answered.
Defaults to 20 seconds.