Customizing Cisco SPA and Wireless IP Phones
Enabling Call Features
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 59
3
Logging Missed Calls (Cisco SPA300 Series and Cisco
SPA500 Series)
You may want to disable or enable missed call logging per extension. For example,
if you have set up a line to monitor another user’s line, you may want to disable
missed call logging for the monitored line.
STEP 1 Log in to the configuration utility.
STEP 2 Click Admin Login and advanced.
STEP 3 Click the User tab.
STEP 4 Under Supplementary Services, in the Log Missed Calls for EXT <number> field,
choose yes.
STEP 5 Click Submit All Changes.
Enabling Paging (Intercom)
The paging, or intercom feature, allows two types of paging:
Single Page
A user can directly contact another user by phone. If the person being paged has
configured their phone to automatically accept pages (see Configuring a Phone
to Automatically Accept Pages, page 60), the phone does not ring and a direct
connection between the two phones is automatically established when paging is
initiated.
Group Paging
Group Paging lets the user page all the client stations at once, or page groups of
phones. If the client station is on an active call while a group page starts, the
incoming page is ignored.
When paging occurs, the speaker on the paged stations is automatically powered
on unless the handset or headset is being used.
Group page is one-way only. The paged client stations can only listen to the call
from the originator.
To Next Page
Loading...
Need help?
General
